# This is the translate file translate.txt
# This is used to translate messages from the GUI (QML) to the serial port and vice versa. 
# Ideally, the GUI messages are human readable so that the GUI code makes sense to UI designers.
# The messages to the outside world via the serial port can be machine readable, for example by an attached microcontroller.
#
# Format for QML -> serial translation:
# G:string_from_GUI=%s,T:translated_string_to_serial%s 

# Format for serial -> QML translation:
# M:string_from_serial=%s,T:translated_string_to_QML=%s 
#
#--------------------------------------
# Example of GUI -> serial port message 
#
# translate file contains:
# 	G:motorSpeed=%s,T:s1=%s
#
# QML statement executed: (assume slider1.value == 99)
#	connection.send("motorSpeed="+slider1.value)
#
# serial port output:
#	s1=99<return>
#
#--------------------------------------
# Example of serial port message -> GUI
#
# translate file contains:
# 	M:t1=%s,T:motorTemperature.text=%s
#
# Serial port receives this string:
#	t1=45<return>
#
# QML effect:
# Text {
# 	objectName: "motorTemperature"
#        x: 0

# ==============================================
# default translation file entries
# these are used if there is no other match
M:%s,T:%s
G:%s,T:%s