BMPload (SLCDx) RELEASE NOTES

To contact Technical Support please email:  support@reachtech.com.


VERSION 1.11.0
(Defects)
250	"Load from .bin" file should clear text boxes (bmps, fonts, macros, fw)
317	Add BMP using 32 bit bitmap and select it. BMPload crashes.
329	BMPload needs to allow using a variable to attach a macro to a touch
338	CRC failure if only macro file loaded
356	BMPload crashes if whitespace in firmware upgrade text box


VERSION 1.10.0 (Chronological order; latest first)
(Features)
113	Display CRC when saving BIN file

(Defects)
308	CRC error occurs when data being stored contains no macros
166	Checks for enough memory available use diff of unsigned values, which can never be less than zero
179	Error string for port in use error should only contain "COMn" for port name
 95 	Do Not allow non *.upg firmware files to be selected
243	File selection dialogs should exclude inappropriate files
185	Error messages for syntax errors in fonts.rfl file not helpful
113	Long macro file name causes macro load to fail
221	4MB Flash display controllers (SCLD6,43) do not use all available space
227	Transparent bitmaps should not require ".unc" in file name
122	BMPload should not erase sub-blocks
114	Indentation in macros.txt file causes macro failure
235	Trailing whitespace and comments should be stripped before storing macros


VERSION	1.9.0
(Features)
73	Support macros calls with a label
61	*orient option in BMPload option box so NEMA can run std code
67	Variables supported
64	Bin File load/program view
92	Macros support up to ten parameters
93	Simulate touch at current cursor position

(Defects)
150	Conversion of color from 24 bit to high color (565 bit pattern) does not match device
NA	Fixes issues with comparison of macro names-numbers with label
NA	Function IsDefinedMacroRef() did not compare full length of macros with label
NA	BMPload screen tweak to keep High Color checkbox where it was before. Also some minor box alignment tweaks
104	Issues running under VISTA (Business) OS
NA	Changes to support USB Autobaud restoration of original port settings after use.
NA	(SLCD only): Hotspot press did not restore drawmode
NA	Header file created when macros loaded

- Allowed SLCD build (limited buttons above 118 to 20 characters, reduced animation buffer size)
- added simple math for macro args e.g. `(`0`+1)`


VERSION	1,8.0
(Features)
28-"BMPload sort option" The original BMPload did not sort the BMP files when loaded adding BMPs individually. 
	This was a problem when multiple BMPs were selected. 
	The solution is to add a checkbox that turns sorting on or off. 
(Defects)
24	BMPLoad does not use last accessed directory for file access (1.7 .4rc3)	
38	Changing port or baud should not force a connect		
39	Does not reconnect at lower baud rate properly		
49	BMPload downloads large image even for a single macro		
50	Does not connect at high baud rate if BMPload restarted		
55	BMPload error messages for incompatible BMPs such as 16-bit BMP or compressed wrong (says cannot compress)		
59	Save LST file button adds paths to files		
61	Newline at the end of a bmp.list file causes an error		
69	File "Add Font List" size is not recalculated when "Store into SLCD" button hit		
70	Unsupport BMP files crash Windows Application		
71	Connect/Disconnect button state broken in 1.7.7		
72	Failure to write a header file should return an error
??	Changed 16 bit checkbox to Hi Color
??	Allowed High Color to load 1,2,4,8,24 bpp images	
??	Font files too large for remaining flash size return error.  Avoids exception.