BMPload SLCD5/SLCD5+ RELEASE NOTES

To contact Technical Support, please visit our web page:  www.reachtech.com.

Notes in chronological work order; latest first.


VERSION 2.3.1
(Defects)
419 (Odd Flash Write error at end of programming)


VERSION 2.3.0
(Features)
137	Use Binary Download command to program flash
N/A	Add support for new SLCD5 Plus
N/A	Don't try to connect when setting Baud Rate or Comm Port


VERSION 2.2.2
(Defects)
94	All extra non-displayable characters in font list file should be ignored.
244	"filter" strings used by file selection dialogs should exclude inappropriate file types.
258	Issue *LOAD command after storing to SLCD, so new bitmaps, macros, etc, take effect;
        also, issue "*prevCons" before auto disconnect, so Aux port can be used to download new
	bitmaps, macros, etc, and Main port can be used to issue terminal commands.
251	"Load from .bin" file should clear text boxes (bmps, fonts, macros, fw)
328	BMPload needs to allow using a variable to attach a macro to a touch
(Features)
N/A	After "Load from .bin", any change to bitmaps, macros, or fonts list clears status text
        and clears flags "bin file loaded" and "data stored to SLCD".


VERSION 2.2.1
N/A	Added support for AA'd SIF fonts


VERSION	2.2.0
(Features)
132	Macro call by name, etc ...
133	Macros support up to ten parameters
(Defects)
256	Unnecessary pop-up
191	ICON text misleading
194 	Add Bitmap List and Macro file buttions should use same directory
176 	High numbered COM ports not supported
226	Transparent bitmaps should not require ".unc" in file name